RHM 160

FLOW SENSOR

The RHM 160 is the ultimate cargo and pipeline meter. With a combination of high accuracy and low pressure drop, the RHM 160 is the perfect solution for rapidly transferring large fluid quanties with confidence.

  • Range: 250 kg/min up to 30000 kg/min
  • Pressure: up to 52 bar (754 psi)
  • Temperature: -196°C (-321°F) up to +120°C (248°F)
  • Accuracy: 0.1 % of rate
  • Materials: SS 316L / SS 316Ti, Alloy C22 – 2.4602
  • Process Connection: 12" up to 12"
CONFIGURE
CATEGORY Large Size Sensors, Bunkering, Oil Measurement

General Specifications

Nominal Flow (Qnom)*

30000 kg/min (66139 lb/min)

Minimum Flow (Qmin)*

750 kg/min (1653 lb/min)

Operating Temperature

Fluid from -196°C to 120°C (-320°F to 248°F), see options in Part Number Code

Ambient from -50°C to 80°C (-58°F to 176°F)

Pressure Ratings

Up to 50 bar / 725 psi - dependent upon material

Electrical Connection

Cable entry M25 x 1.5 (standard), M20 x 1.5, ½” NPT, ¾” NPT (optional)

Max. cable length to remote RHE transmitter 30m / 98ft

Sensor Enclosure Materials

Stainless steel (standard), 316 stainless steel (optional)

Epoxy coated aluminum terminal box (standard), SS 316 terminal box (optional)

Enclosure Type

Protection class IP66 / NEMA 4X with Standard Temperature Range (Option N1/NA); IP65 / NEMA 4 for Extended Temperature Ranges (Option E3)

Wetted Materials

1.4571 (316Ti), 2.4602 (Alloy C22)

Additional/customer specific materials available upon request

Process Connections

Nearly any - the RHEONIK AnyPipeFit Commitment. Consult factory for types/sizes not listed

Pressure Rating Compliance

Europe – PED: Module B3.2+C2

Certifications and Approvals

ATEX / IECEx Approvals for zone 0, 1, 2 (suitably rated RHE transmitter required)

North American Approvals for Class I, Div. 1, Groups ABCD (suitably rated RHE transmitter required)

American Bureau of Shipping (ABS) Type Approval for use on marine vessels

Documentation, Testing and Inspection

All sensors are hydro tested, calibrated and supplied with a traceable calibration certificate. Customized calibration and testing services available

Project Documentation and QA, Services

Rheonik offers a full set of services for large and complex engineering projects. Typical services offered are, but not limited to:

•Certificates of origin and conformity, mill certificates

•Data books including WPAR, WQS, NDT, test & quality plans, functional testing, calibration procedures, customized packing, factory acceptance etc.

•Start up and commissioning services on/offshore

Options

Enclosure heating for high temperature applications

Cleaning for oxygen service

Full service painting to project specifications – consult factory

 

* At Qnom  pressure drop will be approximately 1 bar (14 psi) for H20. Sensors can be operated at higher flow rates but pressure drop will be higher. Maximum recommended velocity (liquid) through the sensor is 15 m/s. Beyond this point, cavitation may occur. Qmin is the recommended lowest flow rate. Sensors will measure flow rates lower than Qmin, but uncertainty may increase beyond 0.5% of rate.

These flow rate and pressure drop statements relate to standard pressure tube sensor versions. Models with higher pressure ratings have increased wall thickness and will have higher pressure drops and lower Qnom values.