Attention

Material surcharge

Material prices depend on the day. Under certain circumstances, the price changes with your selection in the order confirmation.

Attention

Please Make Your Selections

Test

RHE 42

Ex c Field Mount

ESSENTIALS
MATERIAL & CONNECTIONS
OPTIONS
ADDITIONALS
TRANSMITTER
SUMMARY

Construction Type

RB Remote Mount Alu Enclosure IP65 Exd(e), ambient -20 to +60°C, without display and 3m integral cable

RC Remote Mount Alu Enclosure IP65 Exd(e), ambient -20 to +60°C, without display and 10m integral cable

RD Remote Mount Alu Enclosure IP65 Exd(e), ambient -20 to +60°C, with color display and 3m integral cable

RE Remote Mount Alu Enclosure IP65 Exd(e), ambient -20 to +60°C, with color display and 10m integral cable

C1 Compact Mount Alu Enclosure at Sensor IP65 Exd(e) without display

C1

Compact Mount Alu Enclosure at Sensor IP65 Exd(e) without display

Only sensors RHM06S up to RHM20S seal less construction type. For temperature please refer to datasheet

CD Compact Mount Alu Enclosure at Sensor IP65 Exd(e) with color display

CD

Compact Mount Alu Enclosure at Sensor IP65 Exd(e) with color display

Only sensors RHM06S up to RHM20S seal less construction type. For temperature please refer to datasheet

Supply Voltage

D1 12 to 24 VDC (+/- 10%) max. 4W

Software Function Package

SO Standard OP system - mass flow, normalized density / volume, Assurance View® Diagnostics

DO Enhanced OP system - SO plus measured density / volume

DO

Enhanced OP system - SO plus measured density / volume

Requires RHM with density calibration

AF Enhanced OP System plus Assurance Factor®, ZP History, Data Recording, PID Controller, PFPM

CT Enhanced OP System plus OG, Precision Flow Analysis, Hardware Lock Switch

OG Enhanced OP System plus AF, API Standard Density/Volume, Net Oil Calculation, Concentration

FR Enhanced OP System plus CT, Super Fast Response Firmware with 4 kHz Update Rate

I/O Configuration

B1 Base Configuration - 2*DO, 2*DI, RS485 (Modbus)

EB Base TCP Configuration - 2*DO, 2*DI, Modbus TCP / IPv4, RS485 (Modbus)

EA TCP All - 2*4/20mA (a/p), 2*DO, 2*DI, Modbus TCP / IPv4, HART +RS 485 (Modbus)

S1 Standard One - 1*4/20mA (a/p), 2*DO (Pulse/Freq/Status), 1*DI, RS485 (Modbus)

1H Standard One plus HART

S2 Standard Two - 2*4/20mA (a/p), 2*DO (Pulse/Freq/Status), 2*DI, HART + RS485 (Modbus)

i1 Standard One is - 1*4/20mA (is, p), 1*DO (Pulse/Freq/Status - is), 1*DI (is), HART + RS485 (Modbus - non is)

i2 Standard Two is - 2*4/20mA (is, p), 1*DO (Pulse/Freq/Status - is), 1*DI (is), HART + RS485 (Modbus - non is)

FF Foundation Fieldbus FFH1 (FISCO), RS485 (Modbus - non is)

F2 Foundation Fieldbus FFH1 (FISCO), 1*4/20mA (is, p), 1*DO (is), RS485 (Modbus - non is)

PA Profibus PA, RS485 (Modbus - non is)

P2 Profibus PA, 1*4/20mA (is, p), 1*DO (is), RS485 (Modbus - non is)

Hazardous Area Approvals

AS ATEX/IECEx Ex II (1)G [Ex ia Ga] IIC (RHE in ordinary locations)

A2 ATEX/IECEx Ex II 3(1)G Ex db ec [ia Ga] IIC T6/T4 Gc

A2

ATEX/IECEx Ex II 3(1)G Ex db ec [ia Ga] IIC T6/T4 Gc

I/O Options F* and P* only with T4

A1 ATEX/IECEx Ex II 2(1)G Ex db eb [ia Ga] IIC T6/T4 Gb

A1

ATEX/IECEx Ex II 2(1)G Ex db eb [ia Ga] IIC T6/T4 Gb

I/O Options F* and P* only with T4

Performance Certification

NN No Performance Certification

R7 Custody transfer certification OIML-CS R117

R7

Custody transfer certification OIML-CS R117

Requires hardware lock switch option NNH

9R Custody transfer certification OIML-CS R139

9R

Custody transfer certification OIML-CS R139

Requires hardware lock switch option NNH

Options

NNN None / all standard

N67 Enhanced enclosure dual rating IP66/67 NEMA 4X/6, ATEX/IECEx only IP66

N67

Enhanced enclosure dual rating IP66/67 NEMA 4X/6, ATEX/IECEx only IP66

Ambient -40°C to +65°C, caution temperature limitations of the display - please refer to RHE45 datasheet

NNH Hardware lock switch function (included in CT Software Function Package)

Additionals

SI Pre-setting of pulse, analog outputs according to setting instructions.

SI

Pre-setting of pulse, analog outputs according to setting instructions.

Please download / fill in questionnaire and enclose in respective purchase order: https://www.rheonik.com/products/transmitter/rhe-42/downloads

C4 Standard sensor cable, halogen free, -50 to +105°C, 9 wires - not for RHE16

C4

Standard sensor cable, halogen free, -50 to +105°C, 9 wires - not for RHE16

Price per meter

C6 Steel armoured sensor cable, halogen free, -50 to +105°C, 9 wires - not for RHE16

HS Brackets for hook mounting (set of 2 brackets) in stainless steel

H6 Brackets for hook mounting (set of 2 brackets) in SS316

HM Quality HART Modem (to connect via USB to PC)

IT Interconnection box for standard cable prolongation, 2* M20 x 1.5 with glands

IM Interconnection box for RHM sensors with Electrical Connection type TM (free PTFE cable ends) with M16 x 1.5 / M20 x 1.5 glands - to connect standard cable with PTFE cable ends

MO Modbus RS485 terminals to PC USB Converter for RHE16/2X/4X

P0 10m pre-assembled C4 cable (cable ends ready for connection terminals) - not for RHE16

P3 3m pre-assembled C4 cable (cable ends ready for connection terminals) - not for RHE16

PP PC Software RHEComPRO+ license key

PP

PC Software RHEComPRO+ license key

Upgrade for two years are included

PR PC Software RHEComPRO license key

PR

PC Software RHEComPRO license key

Upgrade for two years are included

RS 5m PC cable (Mini USB to PC USB) - to connect PC / RHECom PC software for RHE16/2x/4x

SF Sunshade for RHE21/42

SO USB flash drive with PC software RHEComFree, operation manual, calibration certificate(s), csv configuration file(s). One USB drive per order is sufficient. For RHE16/2X/4X

TP Plate with TAG number in Stainless Steel (other labelling standard)

TC Complete labelling (type information, TAG, Ex label) in Stainless Steel

Summary of your configuration

Your cart is empty.

Your quote was successfully sent.

NEEDED PROJECT INFORMATION

Please confirm required fields.

YOUR CONTACT

Yes, please inform me about Rheonik news

I agree, that Rheonik Messtechnik GmbH can send me information via email. My data will not be passed on to third parties and will only be used to answer my request. I can revoke my consent at any time by writing an email to info@rheonik.com. What is my data being used for?*

RHE 42 Ex c Field Mount

RHM Product code:

CONTINUE

ADD TO CART

GET A QUOTE

DETAILS